chevy malibu no power issue solved

One of every Chevy enthusiast’s biggest nightmares is a chevy malibu no power

Imagine suddenly having a dead engine while driving along a deserted street at night!

As readers have asked for more Chevy Malibu troubleshooting advice, my staff has compiled a list of potential reasons and quick fixes. Keep checking back for more. 

What’s the cause of the chevy malibu no power in engine?

Malibu lacks power 

What Does “Engine Power Reduced” Mean on My Chevy Malibu? 

What does “engine power reduced” mean on my Chevy Malibu? 

Chevy Malibu’s lack of power is probably due to issues with the sensors (O2/MAF), throttle bodies, air filters, fuse, EGR valves, and engine oil. Let’s investigate it more: 

Inaccurate Mass Air Flow (MAF) Sensors 

MAF sensors are made to track and gauge engine airflow, guaranteeing that the fuel-to-air ratio in your Malibu’s combustion chamber is sufficient. 

What then occurs if something goes wrong with these working devices? 

When inaccurate data is entered, the PCM (Power Control Modules) will set off false alarms, causing the P0130 code and the “Reduced/No Electrical Power” mode to be activated. 

These three prevalent problems could be the initial cause: 

Open ground wires 

faulty connections 

soiled sensors 

Malfunctioning Throttle Body

Throttle bodies, like MAF sensors, regulate the engine’s ideal airflow. The Malibu entered “No Power” mode due to their operational failure, and the warning lights came on. 

A malfunctioning throttle can be attributed to one of the following three factors: 

soiled physique 

Incorrect ground connections 

shaky relationships 

Spark plug failure 

Seeing how an engine could function adequately without premium spark plugs is challenging. 

Any malfunction, corrosion, normal wear and tear, or other problem with these spark plugs will abruptly result in the Malibu cutting engine power. 

Usually, overheating is the cause of these problems. Think about adding coolant or shutting off the air conditioning! 

Automotive Sensor Problems 

A Chevy Malibu is equipped with various sensors, right? 

The oxygen sensors, which assist in determining the fuel-to-air ratio inside the diesel engine block, are just one of the many sensors included in the design to ensure the vehicle’s continuous performance. 

The failure of the O2 sensors will trigger the “No Power” mode. In addition, anticipate the following four symptoms to manifest themselves: 

Poor fuel efficiency for the internal combustion engine 

overall reduction in engine performance 

Check engine light (CEL) flickering; OBD reader scans for P0130 code 

Problems With The EGR Valves Or Fuel Pumps 

Fuel pumps transfer gasoline from the tank to the vehicle’s engine, as their name says. 

A malfunctioning, clogged, or worn-out fuel injector reduces the car’s power by not delivering the fuel mixture promptly. As soon as possible, replace or fix the gasoline pump! 

My experience involved an issue with the EGR (exhaust gas recirculation system), which controls engine emissions. 

It’s only a matter of time till they break down or become jammed open. Even worse, I had a rough idle and sluggish acceleration. 

Blown Fuse

Blowing fuses can also cause “No Power” mode, though they are less frequent than other problems. This is particularly true if Malibu’s control system is strongly linked to the underhood fuse box. 

You cannot find the precise fuse that blows with a scanner or code reader. There is little choice except to open the dashboard behind the hood and check each fuse individually. 

Dirty motor oil 

Engine oil plays a vital role in lubricating and greasing all of the moving parts in an engine, a function that even a kid can understand. 

Allowing debris, water, or any other impurity to get into the oil can kill your automobile, leading to catastrophic engine failure (sealed pistons, burning valves, etc.) and even collisions while driving! 

Thus, prudent drivers should pay attention to the need for routine oil changes. 

Please remind me when you purchased the new oil. Now is the right time to do so. Check this link for additional guidance on oil change intervals for synthetic oil users (such as 0w-20). 

Air Filter Jam 

In close collaboration with the MAF and O2 sensors, air filters eliminate particulates from the air before they reach the engine, promoting a clean and healthy combustion chamber. 

It doesn’t take a rocket scientist to figure out what would happen if these filters clogged! 

Additional issues may arise if the problem persists after cleaning the filters appropriately. 

How Can I Jump-Start or Avoid My chevy malibu no power Engine? 

Chevy Malibu No Power

image source:wikipedia

The 2017 Chevy Malibu engine power recall was lowered 

Chevy Malibu Jump-Start Without Power 

The best course of action is to replace each of the malfunctioning compartments mentioned above. 

However, as previously indicated, what happens if the vehicle becomes stuck at a strange hour on a deserted street and there are no nearby auto repair shops? 

At that point, the best short-term solution will be to bypass or jump-start the engine until more fixes and replacements are available. 

Regarding Malibu Manual Transmission 

Step 1: Drive the automobile to the summit of the hill. Either do it on your own or ask for aid from others. 

Step 2: Engage the second gear and depress the clutch. 

Step 3: Turn on the ignition (key position 2) without turning on the engine. Turn it one step from left to right after inserting the key. 

Step 4: Release the brakes while maintaining a depressed clutch. Go coast down this hill, or get someone else to push the car for you. 

Step 5: As soon as the speed hits 8 KPH (5 MPH), quickly release the clutch. This is when your engine should start. If not, press and hold the clutches down one more time. 

For Malibu with Automatic Transmission and Batteries 

Phase 1. Seek assistance from other motorists. Close to your automobile, park the second one. 

Step 2: Turn off both cars and take out the keys. Turn both of them into “Emergency Brake” mode. 

Step 3: Locate the battery terminals in step three. After that, connect the required battery cables in the following order: 

  • The positiveThe positive terminal (your automobile) is the first red clamp. 
  • The positives positive terminal of the second red clamp (the booster car) 
  • The booster car’s first black clamp is the negative terminal. 
  • Any metal part on your engine is the second black clamp. 

Step 4: Before starting your engine, start the boosters. To expedite the procedure, gradually increase the booster’s idle speed. 

Step 5: Unplug the battery connections and jumper cables in the opposite sequence (see Step 3). 

FAQs

Concerning the Chevy Malibu, Is It Possible To Drive A 2015 Chevy Malibu With Reduced Engine Power? 

Yes, but just for a very brief period. Even the preceding jump-starting advice will only work for a while; you need to identify the source of the issue and address it as soon as possible. 

This response is equally valid for years later (such as 2013 Malibu engine power reductions) and years before (such as 2016 Chevy Malibu engine power reductions). 

How Much Does It Cost to Fix the Engine Power Reduction on a 2016 Malibu? 

The cost varies from $100 to $500 based on the components requiring repair. 

In summary 

My research and experience on Chevy Malibu, which shows no power issues, would relieve some of your worries. 

Every few months, take the automobile in for routine maintenance to identify and fix any early-stage problems before they worsen. For more advice, please write to me!

Leave a comment