P1326 glow relay stuck on:Ultimate Fix guide

If you are a Kia or Hyundai owner, you could be worried about the p1326 glow relay stuck on issue.

P1326 code P1326 code is connected with the Knock Sensor Detection System (KSDS) and triggered by the engine control module when it detects unusual vibrations within the Engine.

It is the glow relay used to warm the Engine to allow combustion, but it can fail or wear out, which can cause issues like problems with power, beginning the Engine, or even the engine stalling.

When they understand the potential reasons and symptoms of P1326, car owners can take the appropriate actions to determine the cause. Making the correct diagnosis in time can ensure improved performance and long-term durability.

This article will provide insight into what the P1326 code could mean, the possible causes and signs, and the best way to fix this issue correctly.

What is the P1326 Code?

This Code, P1326, can be described as an OBD-II trouble code that indicates issues with the vehicle’s knock sensor or the glow relay. The Code could be triggered for a variety of reasons, dependent on the car’s make and model.

For the diesel engine Kia vehicle, P1326 is usually a sign of problems related to the glow plug relays that heat the engine’s cylinders in cold temperatures. If these relays fail, they can cause issues starting or poor performance.

However, there are many Kia as well as Hyundai vehicles that are affected by P1326 issues due to problems in issues with the Knock Sensor Detection System (KSDS). The system is designed to monitor engine vibrations and helps prevent damaging knocking. An error in the software of the KSDS could result in the P1326 code.

The solution to the P1326 code is primarily about identifying the source. You should seek repairs or replacement if the problem is due to a defective knock sensor or wiring. In case of software malfunctions in the KSDS, upgrading the system can fix the issue. Replacing the relay is required for cases that involve defective relays for glow plugs.

Remember that solving the P1326 code is vital to ensuring your vehicle is safe and performs best.

Causes of code P1326 Glow Relay Stuck On

P1326 code is related to the Knock Sensor system found in automobiles, specifically Kia and Hyundai models. These are the most common reasons that led to this Code:

A defective knock sensor The main reason for P1326 is a malfunctioning knock sensor, which may not recognize engine noises. This results in decreased efficiency and performance.

KSDS Software error in many Kia as well as Hyundai models. A software issue in the Knock Sensor Detection System (KSDS) could also cause a P1326 error code. It is necessary to update the software to fix the problem.

Electrical connections could be better.

Loose or damaged connectors cause an intermittent connection between knock sensors and the engine control unit. This can lead to inaccurate readings and the appearance of the code P1326.

Regular inspection and maintenance of the sensor’s connections will help prevent this problem.

p1326 glow relay stuck on

Oil of poor quality or gas

Poor quality oil or fuel can result in knocking or pinging within the Engine, which triggers the knock sensor, leading to the P1326 code.

Using premium fuel and following the recommended intervals for oil changes are essential for ensuring optimal engine performance and preventing knock-related problems.

The system operates in the limp mode.

If the vehicle notices an issue of severe severity, the vehicle may go into limp mode, which reduces engine power to safeguard against further damage. This is usually associated with the code P1326.

Avoid driving while in limp mode as much as feasible since it could cause a decrease in vehicle performance. It is also essential to take action immediately to avoid further harm.

Broken wiring harness

An unrepaired wiring harness could result in various electrical problems, such as knock sensor readings and lighting of code P1326. The wiring harness is the nerve system for the vehicle, and any damage it sustains could have a wide-ranging impact on the overall performance of the Engine.

Bearings on rods that have worn out

Wearing rod bearings may cause excessive engine vibrations and noise that are sometimes misinterpreted as knocking and cause knock sensors to activate the code P1326. The timely replacement of worn-out rod bearings is essential to prevent an engine breakdown that could be catastrophic and to ensure the silent and smooth operation of the Engine.

A short circuit short-circuits the glow relay.

A short circuit within the relay that glows frequently in diesel-engine Kia models could trigger the P1326 code, resulting in problems starting the Engine during cold temperatures. The purpose of the glow relay is to provide warm air for cold start-ups, and any malfunction could cause engine problems in winter.

Potential rod knock problem.

A rod knock is a sign of an internal engine issue caused by the bearing of the damaged connecting rod, which could trigger the knock sensor and the display of the P1326 error code. In the absence of a rod knock, it could result in a catastrophic engine malfunction that requires urgent attention and repairs.

To help you comprehend the distinctions between Kia and Hyundai when it comes to P1326 codes, here’s the comparison table:

Common in Optima modelOccurs in various models
Update KSDS softwareUpdate KSDS software
Replace knock sensorReplace knock sensor
Check wiring and harnessCheck wiring and harness

Maintaining your vehicle by replacing air filters, using quality oil and gas, and checking wiring regularly can help prevent P1326 code issues.

Symptoms of the P1326 Code

Awareness of the symptoms can aid in determining when the problem is a sign of trouble.

  • Check Engine Light The most commonly used indication of Code P1326 will be the check engine light that flashes.
  • Limp Mode: Your car may be in limp mode and start limiting its ability to accelerate to avoid further injury.
  • Power loss It is possible to notice a decline in power, which could affect the speed at which you can accelerate easily.
  • Issue with starting the Engine: Difficulties in starting the gas engine or having trouble with the idle may also be signs of the P1326 code.
  • Stalling and misfireStalling and misfire problems could be present in your day when you least think about it. This could be due to the P1326 code.

By being aware of these warning signs, you should immediately fix the P1326 error and keep the vehicle’s performance.

 data-lazy-sizes=”(max-width: 720px) 100vw, 720px” data-lazy-src=”http://blogproautomotive.com/wp-content/uploads/2023/08/Untitled-design-2023-08-06T122306.715.jpg” data-lazy-srcset=”https://blogproautomotive.com/wp-content/uploads/2023/08/Untitled-design-2023-08-06T122306.715.jpg 720w, https://blogproautomotive.com/wp-content/uploads/2023/08/Untitled-design-2023-08-06T122306.715-300×200.jpg 300w” data-ll-status=”loaded” src=”http://blogproautomotive.com/wp-content/uploads/2023/08/Untitled-design-2023-08-06T122306.715.jpg”/>

Diagnosing P1326 Code

The P1326 code, commonly used to identify the system of knock sensors found in Kia and Hyundai cars, maybe a source of worry to car drivers.

This Code may indicate a problem within the Engine, and it’s crucial to recognize and fix it quickly to keep the Engine running smoothly and avoid any further injury.

This step-by-step guide will assist you in finding and fixing the P1326 error code:

  1. Look to see if there are any other codes: before you dive into a particular P1326 code, check for additional diagnostic trouble codes (DTCs). Sometimes, multiple codes could be present, giving greater insight into possible problems in the vehicle.
  2. Examine the connections and wiring: Begin by visually looking at the connections and wiring with respect to the knock sensor and the Knock Sensor Detection System (KSDS). Examine for evidence of fraying, damage, or corrosion. Incorrect wiring could lead to incorrect readings and trigger the P1326 error code.
  3. Try for the Knock Sensor. Perform a test that tests the function of the Knock Sensor. Using a scanner tool, lightly observe the sensor’s output by tapping the engine block. The sensor should be responsive in response to vibration. If there’s no change to your output signals, then the knock sensor could be defective and need to be replaced.
  4. Verify to see if the Knock Sensor Circuit: Use a multimeter to determine the voltage inside the circuit for knock sensors. The readings should be compared to the specifications of the manufacturer. Any deviation from the normal voltage range could indicate issues with the circuit or weak electrical connections.
  5. Update KSDS Software for specific Kia and Hyundai models. The Knock Sensor Detection System (KSDS) software glitch could result in the P1326 code. Visit a service center that is authorized to upgrade your KSDS software. It usually will fix the issue.
  6. Check the Glow Relay (Diesel Models): If you own a Kia diesel engine, inspect for the relay that controls your light for malfunctions or short circuits. A malfunctioning relay could cause the P1326 code, which can cause problems with cold-starting.
  7. Examine the Engine to identify other issues: The P1326 code could indicate engine issues that include worn-out rod bearings or problems related to your fuel systems. Check the Engine for any issues thoroughly and determine any additional problems that could cause the issue.
  8. Remove the Code and test drive: After making any repairs or solving identified issues, clean the P1326 code using the help of a scanner. Go for an inspection drive to ensure the error code doesn’t reappear or the vehicle operates well.

Be aware that timely identification and resolution of the P1326 code are crucial to ensure the performance of your vehicle, its fuel efficiency, and overall reliability.

Regular maintenance and addressing problems promptly will extend the life of your Kia or Hyundai vehicle and provide more comfortable driving.

P1326 Code Repair and Solutions

The code P1326 indicates an issue with the knock sensor or glow relay. To resolve this issue, you must follow these steps:

  1. Check the wiring. Check the wiring harness to ensure that it’s not damaged or shorted. A defective wiring harness or connection to the knock sensor circuit can cause the P1326 error code.
  2. Examine your knock sensor examine the knock sensor for damages or malfunction. A damaged knock sensor is a frequent reason for the P1326 error code.
  3. Take into consideration recalls for engines. Sometimes, the P1326 fault code could result from a program glitch in the KSDS system. If the problem is related to a Kia or Hyundai vehicle, check for any recalls and take your car to the dealer for an engine control system (ECM) update or replacement.
  4. Set the error code. Clear the fault code P1326 using a diagnostic tool or take the battery off temporarily. This will allow the vehicle to reset its ECU to fix the issue if the root issue has been resolved.
  5. If the issue persists in a car with high mileage, think about adding a fuel additive to the gas tank when refilling. This can help cleanse the fuel system in the Engine and boost the ignition’s performance.

Be sure to immediately take care of the P1326 code to avoid engine damage, especially when your vehicle is a Kia or Hyundai model.

 data-lazy-sizes=”(max-width: 720px) 100vw, 720px” data-lazy-src=”http://blogproautomotive.com/wp-content/uploads/2023/08/Untitled-design-2023-08-06T122412.259.jpg” data-lazy-srcset=”https://blogproautomotive.com/wp-content/uploads/2023/08/Untitled-design-2023-08-06T122412.259.jpg 720w, https://blogproautomotive.com/wp-content/uploads/2023/08/Untitled-design-2023-08-06T122412.259-300×200.jpg 300w” data-ll-status=”loaded” src=”http://blogproautomotive.com/wp-content/uploads/2023/08/Untitled-design-2023-08-06T122412.259.jpg”/>


Finding the P1326 code on Kia and Hyundai automobiles requires a systematic method to pinpoint and solve any issues that could arise with the system for knock detection.

Conducting a thorough inspection of wiring, running tests for functionality or updating software, and fixing engine issues are vital steps in ensuring your vehicle’s performance and avoiding costly damage.

If you follow this guide and seek help from a professional in the event of need, Car owners can make sure their vehicles are running efficiently and with reliability for a long time to come.

Frequently Asked Questions

How can I solve the P1326 error code on Kia vehicles?

To correct this P1326 error code on the Kia vehicle:

  1. Make use of the OBD-II scanner to pinpoint the problem.
  2. Examine the knock sensor and its wiring.
  3. Upgrade the KSDS system software, if required.
  4. Start the Engine again and check whether the issue continues.

What does the error code P1326 mean? What is the significance of P1326 error codes in Hyundai Tucson?

For Hyundai Tucson, The error code P1326 is a sign of an issue in the knock sensor or its wiring or could result from an error in the software of the KSDS system. Testing the sensor and system for any possible problems is essential.

Where is the glow relay within Kia Optima?

The glow relay of Kia Optima’s glow relay Kia Optima is usually located close to an engine control module (ECM). It is accessible by taking off the cover of the engine compartment.

Are there recalls for the P1326 issues on Kia Soul?

There isn’t a specific recall regarding the P1326 issue with the Kia Soul. However, looking for any relevant recalls or updates related to the knock sensor or KSDS system in your vehicle is recommended.

What are the implications of P1326 for 2017? Kia Sportage?

An error code P1326 on the 2017. If addressed, the Kia Sportage can improve engine performance, lower fuel efficiency, and potential engine damage. Identifying and fixing the problem as soon as possible is essential.

Does Kia offer a warranty on P1326?

Kia’s standard warranty could include issues related to the P1326 error message, contingent upon the terms of service and conditions. You should read the warranty documents for your vehicle or call your local Kia dealer for assistance.

Related posts: P2291 Code on 6.7 Powerstroke

Leave a comment